US66 1D
US66 1DUS66 1D

Light & compact, suitable for scanning fast-moving labels

  • US66

Each region has different availability of sales product.

Solution for embedded architecture

Designed as a module for embedded architecture, the scanner is light and compact, and easily built into any equipment.

Non-contact scanning

The scanner can read codes within a distance of 30 +/- 5 mm (from the edge of the board).

Reading notification

Reading is always notified with a buzzer and LED indicator (reading OK light).

Simple setup & change

Barcode commands can help users to setup/change various scanner settings such as bar code type, data transfer format, and communication parameters.

Model US66
Scanner Maximum reading width
(horizontal width)
61mm
Decode capability JAN-13/-8, EAN-13/-8, UPC-A/-E, UPC/EAN + supplementary codes, ITF, Standard 2 of 5, CODABAR (NW-7), CODE39, CODE93, CODE128
Resolution (for CODE39) 0.15mm(0.13mm)(1)
Maximum number of digits (for ITF) 48 digits
PCS 0.45 or greater
Scan direction Forward & Backward
Scan angle (elevation) 30°≥ α ≥-30°
Scan distance 30 +/- 5 mm (from the edge of the board) (2)/a>
Light source CCD
Scan sensor red LED (λ=660 nm)
Reading notification LED indicator, Buzzer
Communication interface Interface RS-232C
Cable -
Connector type Dsub-25P
Power input Rated voltage DC5V
Voltage range 4.75 to 5.25V
Power consumption (at DC 5.0V) Operating: 120 mA TYP; Standby: 40 mA TYP
User environment Operating temperature 0 ~ 40°C (with no ice or condensation)
Relative humidity 10 ~ 90% RH (with no ice or condensation)
Ambient brightness «3000 lux (under daylight fluorescent lamp)
Trigger switch mode 6 trigger switch modes are provided: Auto Off, Momentary Switch, Alternate Switch, Continuous Scan, Auto Power-Off

  1. Number in parenthesis refers to the performance level observed at PCS of 0.90 or greater, and power voltage of 5 V.
  2. Measured when scanning JAN-13 black/white JIS labels.