Compact housing suitable for embedded architecture
Strictly pursues "installation space saving" and "high Internal environment performance" required for built-on scanners.
- QB30-SR (RS-232C model)
- QB30-SU (USB model)
Utilizing the technology developed as a manufacturer of QR code, ideal scanning performance has been achieved.
- Scanning ON/OFF
- Scanning codes
- Shutter timing
- Gain switching
- Lighting LED controlling, etc.
Buzzer, LED, Magic Key
- Power LED: Orange color shows power status
- Scanning Confirmation LED & Buzzer: Three colors of LED lights (blue, green, red) can be used to check the status of scans or notify operator of scanning completion or scanning error
- Magic key: Controls "Scanning ON/OFF" and "USB keyboard I/F" and "USB-COM I/F"(1)
- I/F switching is available only for USB model.
Corresponds to simplified programming language "ADF script." You can edit the data freely and the load on the host device can be reduced.
By the registration of the master data, collation with the scanned data is available.
|1.Scanning Input Mode||After receiving the "master registration command" from the host device, the first scanned data is registered as a master data for comparison and verification.|
|2.File Input Mode||Master data (up to 50 codes) must be transmitted from the host device to the QB30 in advance, allowing comparison and verification among multiple scanned items.|
QB30-SR (RS-232C model)
QB30 has I/O function through a mini Dsub-15 pin connector. When supplied with +5V power, I/O can be controlled from the host device, so an additional AC adapter is not required.
|Abbreviation||Purpose||I/O QB30||Abbreviation||Purpose||I/O QB30|
|1||No Connection||No connection (1)||-||9||TRIGGER||Trigger input||Input|
|3||RXD||Received data||Input||11||OUT1||Output terminal 1||Output|
|4||CTS||Clear to send||Input||12||No Connection||No connection (1)||-|
|5||RTS||Request to send||Output||13||OUT2||Output terminal 2||Output|
|6||GND||Common ground||-||14||COM OUT||Common output (2)||Output|
|7||No Connection||No connection (1)||-||15||+5V||Power||-|
|8||COM IN||Common input (2)||Input/Output|
Example:Production line and Specimen device
If a trigger signal is transmitted to the QB30 with precise timing, the codes on the specimens are scanned according to the signals. If a read error occurs, an NG signal is transmitted from the output terminal (i.e. Patlite).
- Please don't connect to pin 1, 7, 12.
- Isolated from the ground of QB30.
|Type||QB30-SR (RS-232C model)||QB30-SU (USB model)|
|Scanner unit||Readable code||2D code||QR code, micro QR code, SQRC, iQR, PDF417, micro PDF417, Maxi code, DataMatrix (ECC200), Aztec, GS1 DataBar Composite (EAN.UCC Composite)|
|Barcode||EAN-13/-8 (JAN-13/-8), UPC-A/-E, UPC/EAN (Add an add-on), Interleaved 2 of 5, CODABAR (NW-7), CODE39, CODE93, CODE128, GS1-128, GS 1 DataBar (RSS)|
|Minimum resolution||2D code||0.20 mm|
|Moving speed||800 mm/s(1)||-|
|Scanning range||62 mm × 39 mm (Distance from the scan unit: In case it is 40 mm)|
|Confirm scan||LED||One (Blue, green, red)|
|Buzzer||3-step volume control, 3-step tone control|
|Interface||Interface||RS-232C (Mini D-sub 15-pin female)||USB|
|Cable length||0.5 m||2 m|
|External input/output||Input||Trigger reset||-|
|Output||Scanning OK/NG, contrast OK/NGSync signal of external lighting||-|
|Power unit||Rated voltage||5V|
|Power||Supplied from the higher-ranking equipment|
|Supplemental functions||Operating button||1 button (Magic key)|
|Batch reading of multiple codes||Maximum 8|
|Image storage||Maximum 10|
|Environmental performance||Operating temperature||-4 to 122°F (-20~50°C)|
|Mass||Approximately 120 g||Approximately 150 g|
- In case of reading a QR code of a cell size 0.33mm/Ver5 when using an outside trigger
- Android Terminals - New!
- Windows CE - WM Terminals
- BHT-1400 Series - New!
- BHT-1361 CE Series
- BHT-1200 Series CE
- BHT-700 Series CE
- Windows CE Terminals Legacy
- RFID - New!
- Basic OS Terminals
- BHT-1500B - New!
- BHT-1306 Series
- BHT-900 Series
- BHT-600 Series
- BHT-800B Series
- BHT 300 Series
- Basic OS Terminal Legacy
- BHT-1500B - New!
- Hand-Held Scanners
- Stationary Scanners
- Software for Basic OS Terminals
- Software for Scanners
- QR Code®
- Products Roadmap
- QR Code® Products - New!
09/13/2016 - Announced a new product catalog covering the company’s entire lineup...
08/02/2016 - Announced a new BHT-1281 hand-held wireless UHF RFID terminal. The...
04/05/2016 - DENSO ADC, the Americas sales arm of DENSO Wave Incorporated,...